Saint-Gobain
SaintGobain Norbond OP45 OP5C 54"x216ft Finish Blocking Pad for Hydrophobic Coat
SaintGobain Norbond OP45 OP5C 54"x216ft Finish Blocking Pad for Hydrophobic Coat
Couldn't load pickup availability
Saint-Gobain Norbond OP45 OP5C 54"x216ft Finish Blocking Pad for Super Hydrophobic Coating
Price is for one roll 54"x 216ft.
OP45 is a new generation blocking pad designed specifically to bond to the latest generation of low surface energy super hydrophobic coatings. Based on the proven design of the highly successful OP Series, OP45 improves on this with the incorporation of a unique adhesive system engineered specifically to perform on the latest generation
lens coatings. Good quick-stick, outstanding shear performance and easy release make this the ideal product for single-step edging.
Important Instructions
-
Because Saint-Gobain cannot anticipate or control every potential application, we strongly recommend testing of this product under individual application conditions prior to commercial use.
-
Surfaces must be clean and free of oil, grease, moisture, dust and dirt. Isopropyl alcohol is good for cleaning the surface.
-
Apply a uniform pressure of 15 psi (103 kPa) to promote good contact between the material to be bonded and the tape. The application temperature should be between 60°F and 125°F (16°C to 52°C). It is not recommended to apply these tapes at temperatures below 60°F (16°C), as the adhesive does not flow in this condition and can result in poor bonding.
-
Recommended service temperature is between -40°F to 200°F (-40°C to 93°C).
-
The adhesion between the substrate and the tape increases with time, typically reaching final bond strength in 72 hours. Heating the product above 105°F (40°C) will accelerate the adhesion process.
Share
